MFJ 266C HF/VHF/UHF Antenne Analyzer 1.5-185* MHz plus 300-490 MHz + 220 MHz band
Met de nieuwe en eenvoudig te bedienen MFJ-266 digitale analyzer beschikt u over alle elementaire RF-diagnostische functies om uw metingen aan o.a. antennes uit te kunnen voeren!
The MFJ-266C covers HF, VHF, plus UHF amateur and commercial frequencies with digital precision. It also displays SWR, Complex Impedance, and Impedance magnitude simultaneously -- all on the same easy-to-read LCD screen. Use it to measure Capacitance, Inductance, Field Strength, Frequency, plus generate test signals. You can also fine tune stubs, analyze coax, test baluns and RF transformers, and perform many other important RF-related tasks around the shack or on the road!
When it comes to simplicity and convenience, MFJ-266C is a clear winner. Not only is it easy-to-use, but fits comfortably in one hand for on-the-fly measurements on the bench or in the field. Here's the rundown of what this compact powerhouse can deliver:
The MFJ-266C covers all bases -- from 160 Meters through 6 Meters, Airband, 2 Meters, 70 cm, plus VHF/UHF commercial 2-way frequencies:
|Band A|| : ||1.5 to 2.7 MHz|
|Band B|| : ||2.5 to 4.8 MHz|
|Band C|| : ||4.6 to 9.6 MHz|
|Band D|| : ||8.5 to 18.7 MHz|
|Band E|| : ||17.3 to 39 MHz |
|Band F|| : ||33.7 to 65 MHz |
* = Gap
|Band V|| : ||105 to 230 MHz|
|Band U|| : ||300-490 MHz|
The velvet-smooth 10:1 vernier drive and solid state varicap makes fine tuning a breeze, and a built-in dial lock prevents accidental detuning while making measurements. Switched backlighting makes LCD screen easy-to-read in any light.
SWR, Impedance Magnitude, and Complex Impedance
In SWR Mode, the MFJ-266 reads SWR 1:1 to 9.9:1, Impedance Magnitude 10-500 Ohms and Complex Impedance (resistance and reactance). Best of all, it displays all three parameters simultaneously and operating frequency with one quick glance. No other low-cost handheld analyzer offers this! (Note: Z-mag and R+jX not displayed on UHF).
Capacitance and Inductance
Find values for unknown capacitance in pF or unknown inductance in uH quickly. Measurements are made at RF frequencies rather than at the low audio frequencies used by many handheld L/C meters.
Frequency Measurement, Field Strength Readings
In Frequency-Counter Mode, MFJ-266 becomes an accurate 500-MHz counter with a choice of 1-kHz or 100-Hz resolution. The counter mode also features a high-resolution digital field-strength meter for measuring the relative intensity of incoming signals. Together, these functions are extremely useful for checking the operation of oscillators, transmitters, as well as assessing the strength of radiated signals from antenna arrays.
Built-in Interference Detection
In Frequency-Counter Mode, the MFJ-266 also tracks down powerful local signals that can disrupt accurate SWR measurements. When picked up by an antenna under test, these signals may compete with the analyzer's internally generated test signal to make SWR readings appear artificially high. All handheld antenna bridges are subject to additive interference, but only the MFJ-266 can detect the presence of an offending signal, display its severity, and identify the operating frequency!
Powerful Signal Source
The MFJ-266C also functions as a tunable signal source, supplying about 2 Volts peak-to-peak across the entire tuning range. You can use this signal to drive mixers, low-power amplifier stages, or filters, and use it as a source for checking antenna patterns on a range. Add a step attenuator, (MFJ-762) and it becomes a low-level signal source for testing receivers and pre-amps.
Take it With You!
You'll especially appreciate the compact size and bantam weight of the MFJ-266 when up on a roof or perched on a tower. Also, push-button band switching lets you toggle across the spectrum with ease when tucked into cramped spaces.
MFJ-266C is ergonomic, with the antenna N-connector positioned on top of the case and everything else carefully arranged and clearly marked on the front panel -- right in front of your eyes.
The operating manual of the MFJ-266 was professionally written and illustrated to help you understand and master every function quickly. It also includes a guide for ensuring accurate results and getting the most from the unit's advanced features. In the back, you'll find a one-page "Quick Guide" that reviews all controls and functions.
Many Instruments in One
Having the MFJ-266C is like owning several pieces of test equipment. You get a powerful wide-range signal source, Inductance/Capacitance meter, network analyzer, RF field-strength meter and a 500-MHz frequency counter all-in-one small package. The more you use it, the more uses you'll find for it!
Bullet Proof Construction
Features like the rugged aluminum case, solid-state band switching, robust internal construction, and solid-state LCD display ensure that minor bumps and drops won't faze your unit in the least. In fact, you can expect it to hold calibration and deliver reliable service for years to come.
MFJ-266C can be powered from eight internal AA alkaline batteries or from optional 12VDC/240 VAC adapter, MFJ-1312DX. With the long storage life of alkaline batteries, your analyzer will always be ready to go when you are.
Compact W 95,3 x H 165 x D 70 mm
Weighs 0,5 kg. Draws 30-mA in counter mode and 140-mA in analyzer mode.
Includes N-mal to PL-F (SO 239) adapter.
MFJ Analyzer Accessories
|MFJ 5510|| : ||12 VDC Cigarette lighter adapter cord for using your MFJ SWR Analyzers on-the-road. 45 cm retracted curly cord, 152 cm fully stretched.|
|MFJ 66|| : ||Plug these MFJ dip meter coupling coils into an MFJ SWR Analyzer and turn it into a sensitive and accurate band switched dip meter. Two coils cover HF/VHF.|
Maße und Gewicht sind inklusive Verpackung