RigExpert AA-600

The RigExpert AA-600 is a powerful antenna analyzer designed for testing, checking, tuning or repairing antennas and antenna feedlines.

Graphical SWR (Standing Wave Ratio) and impedance, as well as Smith/polar chart displays are key features of these analyzers which significantly reduce the time required to adjust an antenna.

Easy-to use measurement modes, as well as additional features such as connection to a personal computer makes RigExpert AA-600 attractive for professionals and hobbyists.

The following tasks are easily accomplished by using these analyzers:

- Rapid check-out of an antenna
- Tuning an antenna to resonance
- Antenna SWR and impedance measurement and comparison before and after specific event (rain, hurricane, etc.)
- Making coaxial lines or measuring their parameters
- Cable testing and fault location
- Measuring capacitance or inductance of reactive loads

Specifications

Frequency range	:	0.1 to 600 MHz
Frequency entry	:	1 kHz resolution
Measurement	:	For 25, 50, 75 and 100-Ohm systems
SWR measurement range	:	1 to 100 in numerical mode, 1 to 10 in graph mode
SWR display	:	numerical or easily-readable bar
R and X range	:	0…10000, -10000…10000 in numerical mode, 0…1000, -1000…1000 in graph mode
Display modes	:	SWR at single or multiple frequencies
	:	SWR, return loss, R, X, Z, L, C at single frequency
	:	SWR graph, 80 points
	:	R, X graph, 80 points
	:	Smith (or polar) chart, 80 points
	:	TDR (Time Domain Reflectometer) graph

Optional open-short-load calibration in SWR, R,X or Smith/polar chart graph modes.

RF output	:	Connector type: N
	:	Output signal shape: square, 0.1 to 200 MHz. For higher frequencies, harmonics of the main signal are used.
	:	Output power: -10 dBm (at 50 Ohm load)
Power	:	Three 1.5V, alcaline batteries, type AA *
	:	Three 1.2V, 1800…3000 mAh, Ni-MH batteries, type AA
	:	Max. 3 hours of continuous measurement, max. 2 days in stand-by mode when fully charged batteries are used
	:	When the analyzer is connected to a PC or a DC adapter with USB socket, it takes power from these sources
Interface	:	320×240 color TFT display
	:	6×3 keys on the water-proof keypad
	:	Multilingual menus and help screens
	:	USB connection to a personal computer
Dimensions	:	23x10x5.5 cm (9x4x2”)
Operating temperature	:	0…40 °C (32…104 °F)
Weight	:	650g (23 Oz)
Warranty	:	2 years

The RigExpert AA-600 is supplied with:

- RigExpert AA-600 Antenna Analyzer
- Soft case with straps
- Ni-MH rechargeable batteries (3 pcs)
- Battery charger
- USB cable
- N-to-UHF adapter
- User Manual

* Batteries are not included with the analyzer.

Specifications are subject to change without notice.