The RigExpert AA-230 ZOOM Bluetooth
analyzer is designed for measuring SWR (standing wave ratio), return loss, cable loss, as well as other parameters of cable and antenna systems in the range of 100 kHz to 230 MHz.
A built-in ZOOM capability makes graphical measurements especially effective.
An integrated Time Domain Reflectometer mode can be used to locate a fault within the feedline system.
YOUR LAB IN A FIELD
In this AA-230 ZOOM BLE Bluetooth technology has been implanted and opened up new applications for this popular device.
Now, thanks to its ability to work in conjunction with a smartphone or the tablet/netbook, the new RigExpert AA-230 ZOOM Option BLE antenna analyzer is your laboratory in a field.
Download and install the Android application for your smartphone/tablet or AntScope2 for your netbook to:
- Operate the analyzer remotely
- Galvanically isolate the analyzer from the computer device
- See the characteristics of your antenna in more detail
- Locate cable faults in TDR mode
- Share measurement results through social networks.
The following tasks are easily accomplished by using this analyzer:
- Rapid check-out of an antenna
- Tuning an antenna to resonance
- Comparing characteristics of an antenna before and after specific event (rain, hurricane, etc.)
- Making coaxial stubs or measuring their parameters
- Cable testing and fault location, measuring cable loss and characteristic impedance
- Measuring capacitance or inductance of reactive loads
Specificaties AA-230 ZOOM Bluetooth
|Frequency range|| : ||0,1 to 230 MHz|
|Frequency entry|| : ||1 kHz resolution|
|Measurement|| : ||For 25, 50, 75 and 100-Ohm systems|
|SWR measurement range|| : ||1 to 100 in numerical modes, 1 to 10 in chart modes|
|SWR display|| : ||Numerical or analog indicator|
|R and X range|| : ||0…10000, -10000…10000 in numerical modes, 0…1000, -1000…1000 in chart modes|
|Display modes|| : ||SWR at single or multiple frequencies|
| : ||SWR, return loss, R, X, Z, L, C at single frequency|
| : ||SWR chart, 20 to 500 points|
| : ||R, X chart, 20 to 500 points|
| : ||Smith chart, 20 to 500 points|
| : ||Return loss chart, 20 to 500 points|
| : ||TDR (Time Domain Reflectometer) chart|
| : ||Cable tools (loss and characteristic impedance)|
Optional open-short-load calibration.
|Non Volatile memory|| : ||100 slots to save measurement results|
|RF output|| : ||Connector type: N|
| : ||Output signal shape: square|
| : ||Output power: -10 dBm (at 50 Ohm load)|
|Power|| : ||Four 1.5V alkaline batteries, type AAA (not included with analyzer)|
| : ||Four 1.2V Ni-MH batteries, type AAA (not included with analyzer)|
| : ||Max. 4 hours of continuous measurement, max. 2 days in stand-by mode when fully charged batteries are used|
| : ||When the analyzer is connected to a PC or a DC adapter with USB socket, it takes power from these sources|
|Interface|| : ||290×220 color TFT display|
| : ||6×3 keys on the water-proof keypad|
| : ||Multilingual menus and help screens|
| : ||USB connection to a personal computer|
|Dimensions|| : ||82 x 182 x 32 mm (3.2 x 7.2 x 1.3 in)|
|Operating temperature|| : ||0…40 °C (32…104 °F)|
|Weight|| : ||236 g (8.32 oz)|
|Warranty|| : ||2 years|
Specifications are subject to change without notice.
You can find detailed information and screenshots in the brochure and manual for download.
Maße und Gewicht sind inklusive Verpackung
||L23,5 x B16 x H8 cm